Scrapping your landline couldn't be easer. Simply discard your landline, plug in a standard telephone into the “PHONE” connector (as shown in the diagram below), power the cellular bluetooth converter, and pair the converter to your bluetooth cellular phone. Your done. The standard telephone(s) can then answer cellular phone calls or call out on the cellular phone.

If you want to do away with your landline, but you still want a full PBX featured phone system, just connect the Teligent converter box to your present telephone equipment as shown in the diagram below. Do not connect the outputs together. Do not directly connect your present phone equipment to this line. Only Teligent equipment is to be connected to this line. This is a proprietary line and every phone or adapter box must be set to its own unique station number.

The "In-House Wire" output port transforms the existing single in-house telephone wire in the walls into a 4 voice channel path to each telephone. The system supports all of the advanced business telephone features without requiring the wiring complexity associated with a full PBX. Most of these features are not found on other wireless business systems. Some of the key features are summarized below.

Supports additional standard phone equipment up to 13 additional stations and 26 extensions using Adapter Boxes.

The Adapter Box connected to the in-house wire can be used to expand the number of standard telephone equipment instruments used. Each additional instrument has two unique extension numbers for transferring calls and for internal COM calls.

NOTE: The Adapter Box is for use only with a Bluetooth Converter or a Teligent Controller.

The System Speaker Phone and the System Monitor Phone can be connected directly to the in-house wire. These phones have many one touch features.

NOTE: The System Phones are for use only with a Bluetooth Converter or a Teligent Controller.

The system can be installed using the existing twisted pair telephone wire in the walls and ceiling of your building. Once the system is installed, you can unplug any station on the system and plug it in at any other location without changing any wiring or program settings.

Hold, call transfer, paging, line privacy, call ring back, and many other useful features for cellular business systems. .

One or two 314-07 Door Phones can be installed with the system. The Door Phone can also control door / gate locks. The Door Phone is powered by the in-house wire and can be installed using existing doorbell wires.

NOTE: The 314-07 Door Phone is for use only with the Bluetooth Converter or a Teligent Controller.